
A minimum of 2 coats of clear sealer application is essential for decorative concrete sealing on stamped concrete and exposed aggregate concrete. For previously unsealed interlock or paving stones, we recommend applying 3 coats for optimal protection.
We faced a challenge while rejuvenating this concrete driveway, which required complete recoloring with a colored sealer to restore its original appearance from installation. Unfortunately, years of poor-quality sealing from various companies had damaged the concrete driveway. Our attempts to strip the old sealer were complicated by the concrete 'etching.' We aimed to preserve the homeowner's beautiful swirl finish, so we opted for Plan B. The homeowner was ecstatic with the results! We finished the project with multiple coats of a non-slip concrete sealer to enhance safety and durability.
Toronto, ON
June, 2025

We can remove debris, sediment and weeds from your concrete surface to ensure a proper water/stain-proof seal!
STEAM PRESSURE CLEANING AVAILABLE @ 104 DEGREES CELSIUS.
Have plain broom finish concrete? We can protect it with an invisible penetrating sealer to slow down concrete spalling and staining. Just ask.

Will your concrete sealing company take the time to "edge" your lawn that is growing over your interlock/concrete?
We make sure that the time is taken to expose & clean every square inch.
If takes a trimmer, spade, or any tool we can use to expose the surface to be sealed, we will make sure it's done.

We don't mind taking the time to use
3" wide industrial masking tape to protect the surfaces surrounding your decorative concrete.
On tricky corners, we double it up just to be extra careful!
We also use tarps to cover asphalt to prevent concrete sealer from staining the asphalt driveway.
We like clean sidewalks & curbs!
We are pretty sure that you do, too.

We strongly advise homeowners not to seal natural stone if it's not necessary. Regular acrylic concrete sealing compounds should NEVER be used on natural stone, because it is not porous.
We can treat natural stone with a special enhancer/sealer from KIMBOL SEALER LTD.

Sometimes, a homeowner or company applies a water-based latex sealer that will turn white & flaky. Sometimes, a homeowner or company sealed a wet concrete surface.
Sealing Concrete is a tricky process that should not be taken lightly. The wrong conditions/sealer might require stripping via soft media blasting, or extreme pressure cleaning over 7500 PSI or Chemical stripping.

We source our Decorative Concrete sealer from KIMBOL SEALER LTD., in Woodbridge, ON.
KIMBOL has been in business for over 38 years.
KIMBOL is a GTA family owned manufacturer/supplier that makes a
"pre-mixed" NON-SLIP "solvent-based" Virgin Acrylic Sealer.
You can buy it from them yourself if you really want to.

Water-based sealer and improperly applied solvent-based sealer turns white/flaky & requires stripping.

The "cheaper guys" take shortcuts on your property. We make sure to 'edge' and block off the areas that shoudn't be sealed.

We tape off the sidewalks/curbs so you don't have sealer overspray on the surfaces that shouldn't be sealed. We protect sprinkler heads, too.
Neat & clean!

WE DON'T INSTALL NEW DRIVEWAYS. WE DON'T EXTEND DRIVEWAYS. WE ONLY SEAL.